1. Driven infeed rollerconveyor.
2. Sandingmachine with dish and round brushes.
3. IR- Preheating.
4. Spraying cabine COOLAC
5. 90 degree angle transfer
6. Cross conveyor
7. Drying ( cross ) drying nozzle cabin. No OIR, but line prepared fro OIR, for higher capacity.
Line specifications :
Feeding – spraying nozzles: app. 15 m/min
Layup speed app. 7 m/min
Min-max speed 5 – 20 m/min
Working width machine 210 mm
Working height machine: 920 mm +/- 50 mm
Production capacity: 4 pcs. pr/min, by workpiece L = 1300 mm
Feeding speed drying area 0,4 m/min
Workpiece dimension:
Length Max 3600 mm
Length Min 300 mm
Width Max 230 mm
Width Min 90 mm
Height Max 120 mm
Height Min 10 mm
POS 1. Infeeding roller conveyor.
Length 2500 mm
Roller width 300 mm
Distance between rollers 185 mm c-c
Roller ø 60 mm
Roller with PVC tube coevering.
POS 2. Brushing machine VLG.
Brushing equipment.
1 dish brush unit right.
1 dish brush unit top.
1 round brush aggregate from right side top.
1 round brush aggregate from left side top.
1 round brush aggregate from left side.
The rpm can regulated for each brush be mean of frequency converter.
The aggregates can be manually adjusted in different angles.
Length 5000 mm
Feeding speed 6 -30 m/min
Production speed 15 m/min
POS 3. IRM – preheating canal.
2 pcs. IRM lamps
1 return air ventilator
Length of canal = 1200 mm
Length of conveyor = 2200 mm.
POS 4. Venjacob spraying cabin. Type Coolac.
Transport through cabin with belt.
Continually clean of belt, with pneumatic adjusted scraper.
Be means of scraper the OVERSPRAY on belt can be reused.
Feeding speed controlled with frequency converter.
Electronic control of spraying pistols.
ON/OFF must be programmed for each spraying pistol.
The adjustment values for different work pieces/profiles seen on Touch panel.
On Touch panel it is possible to see the total meter run + the number of workpieces.
6 Pistol arms with Wagner air mix-pistols.
Spraying control program for 99 different setups.
POS 5. Ekstra conveyor.
1 Intermediate conveyor, swing able to allow easy access to backside of spraying cabin.
Length = 1600 mm
POS 6. Angle transfer.
Working along/across with transfer to right.
Length = 4500 mm
Distance between rollers 185 mm c-c
22 pcs. of transfer arms.
POS 6 A. Cross conveyor with straps.
Length = 5500 mm
Number of straps 22.
Distance between straps 185 mm.
POS 7. Nozzle drying canal.
Lengt = 2500 mm
Width = 4500 mm
With spare nozzles and temperature regulating control.
Air speed max. 12 m/sek.
The canal/line are prepared for IR drying segment. ( for increasing capacity )
The line are working with OPCO piston pump type 33-220.
